Filter
Top Products
130
Continued
Macro operation using the Timer function
5
Set the label, and then press
the [OK] key.
The newly created Timer program key is
displayed.
Input letters to the label in the label setting display by pressing the
keyboard using the supplied Stylus.
For inputting letters to the label, see “Inputting letters (label setting)”
(pages 40 - 41).
Specified settings to the label of the Timer program key besides the
information described on pages 40 - 41 are as follows.
Letter input: Up to 32 letters can be input.
Starting a new line:Available. Starting a new line is counted as a
letter.
Pictographs: Cannot be input.
[SIZE]: Not selectable. The letter size is fixed to
[Medium].
[COLOR]: Not selectable. The letter color is fixed to black.
[ALIGN]: Not selectable. The letter location is fixed to
[Center].
[Label]: Not selectable. The letter indication is fixed to
ON.
Note
Be sure to input at least one letter for the label of a Timer program key. If no letter
is input, the label cannot be set even if you press the [OK] key.
6
Press the [OK] key.
A new program key is set, and the
display returns to step 3.
z Tip
You can create up to 45 Timer program keys.
However, the number of Timer program keys
that you can create may be less than 45
depending on the free memory capacity of the
Remote Commander.
To finish the setting
Press the COMMANDER OFF button for 2 seconds or longer. The display returns
to the Home display. The setting finishes.