Filter
Top Products
14
Charging
Charge the Remote Commander using the supplied Battery charging stand. The
Remote Commander can also be charged by connecting the supplied AC power
adaptor directly without using the Battery charging stand.
Notes
• Be sure to charge the Remote Commander when you use it for the first time.
• Use the supplied AC power adaptor. If an adaptor other than the supplied one is
connected to the Remote Commander, a beep may keep sounding.
1
Connect the supplied AC power adaptor to the
Battery charging stand.
2
Connect the AC power adaptor plug to the wall
outlet.
3
Place the Remote
Commander on the Battery
charging stand.
Charging starts. After about 60 minutes of
charging, the Remote Commander starts
up automatically and the display appears.
After starting up (after the “NAVITUS”
logo is displayed), the Remote
Commander enters calibrating mode.
Calibrate the touch panel display by
referring to page 16. When calibration is
complete, the Home display appears. be
disappears when charging is complete.
Charging indicator
1
3
2