Filter
Top Products
161
Programming a series of actions (macro) for a Component
List
8
Press the [v] or [V] key to
select a List element to be
added, and then press the
[ENTER] key.
In this step, when you press the [ENTER]
key, the color of the selected List element
changes to red. (In the real settings, the
color of List elements is fixed to black.)
z Tip
Each time you press the [v]/[V] key, the cursor moves up/down by an element. If
you press the [v]/[V] key for 2 seconds or longer, the window display scrolls.
9
Press the [OK] key.
The newly created User List key is
displayed.
10
Press the [OK] key.
The new User List key is programmed,
and the display returns to step 4.
To finish the setting
Press the COMMANDER OFF button for 2
seconds or longer. The display returns to the
Home display. The setting finishes.
To set the label again
To set the label of a User List again, press the [LABEL] tag in step 5, and press
the [USER LIST] key whose label you want to change. Then set the letters again
in the display for the label setting, and press the [OK] key.