Filter
Top Products
210
5
Press the [YES] key.
The Remote Commander starts formatting. When formatting a “Memory
Stick” is correctly complete, the confirmation display appears.
z Tip
If you press the [NO] key, the procedure finishes without formatting.
Note
Do not remove the “Memory Stick” while formatting the “Memory Stick.”
6
Press the [OK] key in the confirmation display.
The display returns to the first page of the Step 4.
7
To finish all settings, press the COMMANDER OFF button for 2
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.
If an error message appears
If an abnormal status of the “Memory Stick” is detected while formatting the
“Memory Stick”, an error message appears.
Formatting cannot be carried out as the “Memory Stick” is
broken or locked. Use another “Memory Stick” if it is broken.
If the “Memory Stick” is locked, release the lock and insert it
again. For details on the lock of the “Memory Stick”, refer to
instructions of the “Memory Stick” you purchased.
Saving Remote Commander data to a “Memory Stick” (SAVE)
Continued
Message Symptom and corrective action
The “Memory Stick” is broken
or locked.