Filter
Top Products
212
Setting the Display Window
You can make various settings to the touch panel display.
In addition to calibrating the touch panel display, you can set the automatic off
time of the display window, or the automatic off time and brightness of the
backlight that illuminates the LCD screen.
Calibrating the touch panel display (ALIGNMENT)
The calibration of the touch panel display is usually performed when the
Remote Commander is turned on for the first time. However, you can calibrate
the touch panel display again at any time if necessary.
1
Press the [SET] key for 2 seconds or longer in the
Home display.
The Set display appears.
2
Press the [SYSTEM] key.
3
Press the [DISPLAY] key.
4
Press the [ALIGNMENT] key.