Filter
Top Products
215
Remote Commander’s Other Functions
1 Set Automatic-Off time.
Each time you press the [+] / [–] key,
the time is advanced/reversed by 1
second. If you hold the [+]/[–] key
pressed, the time is advanced/
reversed by 2 seconds. You can adjust
the time between 3 and 60 seconds.
The default setting is 10 seconds.
2 Set the backlight to on or off when
the Remote Commander is
connected to the AC power
adaptor.
Press the [YES] or [NO] key to select
the setting. The selected key is
bordered.
[YES]: To set the backlight not to turn off.*
[NO]: To operate the Automatic-Off function and turn off the
backlight.
The default setting is [NO].
*
The backlight turns off when the display turns off.
6
Press the [OK] key.
Setting of the display’s backlight is complete, and the display returns to
step 4.
Note
When you set the Automatic-Off time of the backlight longer than 10 seconds
(default), the battery life of the Remote Commander may be shorter.
7
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.