Filter
Top Products
217
Remote Commander’s Other Functions
1 Set Automatic-Off time.
Each time you press the [+] or [–] key,
the time is advanced/reversed by 1
minute. If you hold the [+]/[–] key
pressed, the time is advanced/
reversed by 2 minutes. You can adjust
the time between 1 and 30 minutes.
The default setting is 10 minutes.
2 Set the display to on or off always
when the Remote Commander is
connected to the AC power
adaptor despite the setting of the
display’s Automatic-Off function.
Press the [YES] or [NO] key to select
the setting. The selected key is
bordered.
[YES]: To set the display not to turn off.
[NO]:
To operate the Automatic-Off function and turn off the display.
*
* Even when the screen backlight is set to always turn on when the Remote
Commander is connected to the AC power adaptor, the backlight turns off if
the touch panel screen turns off by the Automatic-Off function of the
display.
6
Press the [OK] key.
Setting of the display’s Automatic-Off function finishes, and the display
returns to step 4.
Note
When you set the Automatic-Off time of the display window longer than 10
minutes (default), the battery life of the Remote Commander may be shorter.
7
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.