Filter
Top Products
225
Remote Commander’s Other Functions
Setting to the recovery mode (RECOVERY)
The latest kernel (basic program of the Remote Commander) is updated as
necessary in the NAVITUS web site. After downloading the latest kernel to
“NAVITUS Design”, you can transfer it to the Remote Commander by
connecting the Remote Commander to the computer with the USB cable.
Before connecting the Remote Commander to the computer with the USB cable,
set the Remote Commander to the recovery mode.
1
Press the [SET] key for 2 seconds or longer in the
Home display.
The Set display appears.
2
Press the [SYSTEM] key.
The System display appears.
3
Press the [RECOVERY] key
for 2 seconds or longer.
The confirmation display for the
transition to the recovery mode appears.
4
Press the [YES] key.
After restarting, the Remote Commander enters the recovery mode.
z Tip
If you press the [NO] key, the display returns to step 3 without restarting.
5
To finish the setting, follow the on-screen
instructions in the recovery mode.
When the recovery mode finishes, the Remote Commander is restarted.
If the Remote Commander is restarted, the system clock is reset. After
restarting, set the system clock again.
For details on the recovery mode, see the manual (Help) of “NAVITUS Design.”