Filter
Top Products
37
Basic Operations
Basic Operations of the Remote Commander
The basic operations of the Remote Commander in the operation mode, how to
enter the Set display used for setting the Remote Commander, and how to input
letters are explained here.
Operating a component (Operation mode)
Let’s operate a component by pressing keys shown in the display in the
operation mode.
z Tip
The Remote Commander is preset at the factory to control most Sony components. To use
certain Sony components or components other than Sony’s, see “Programming the preset
codes of components (PRESET)” (page 42) and program the component preset codes for
the Remote Commander.
1
Press the HOME button.
The Home display appears.
2
Press a Component key of
the component you want to
operate.
For example, press the [TV] key.
The Component display assigned to the
pressed key appears.
Continued