Filter
Top Products
53
Basic Operations
3
Press the tag of a Direct
Access button you want to
set the label to.
For example, set the label by pressing the
[Button1] tag.
Note
You cannot select a tag, even if you press a
Direct Access button on the Remote
Commander.
4
Press the [LABEL] key.
The software keyboard appears in the
display.
5
Set the label of the Direct
Access button.
For inputting letters to the label, see
“Inputting letters (label setting)” (pages
40 - 41).
Specified settings to the label of the
Direct Access button besides the
information described on pages 40 - 41
are as follows.
Letter input: Up to 8 letters can be input.
Starting a new line: Not available.
Pictographs: Can be input. A pictograph is counted as 4 letters.
[SIZE]: Not selectable. The letter size is fixed to [Small].
[ALIGN]: Not selectable. The letter location is fixed to
[Center].
[COLOR]: Select a letter color of your preference.
[Label]:Available.
Tags of the Direct Access buttons
Continued