Filter
Top Products
65
Basic Operations
If you want to delete all learned data
Press the [YES] key. The data deleting message appears. When deletion is
complete, the display returns to step 4.
If you do not want to delete all learned data
Press the [NO] key. Learned data will not be deleted and the display will
return to the previous one.
5
Press the key or button
whose learned signal you
want to delete.
When deletion of the learned signal is
complete, the key stops blinking and
appears released (normal).
When the button that has learned the
remote control signal is pressed, the
deletion confirmation message appears.
If you want to delete the learned signal of the button
Press the [YES] key. The button will return to the default setting status,
and the display will return to the previous one.
If you do not want to delete the learned signal of the
button
Press the [NO] key. The learned signal will not be deleted and the display
will return to the previous one.
z Tip
Using the NEXT/BACK button, you can select the page where you assigned the
key or button whose learned signal you want to delete.
6
Press the [OK] key.
The learned signal is deleted, and the
display returns to step 4.
7
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.