Filter
Top Products
84
Customizing the Home display (HOME EDIT)
Continued
5
Set the label of the Alias
Component key to be
created.
For details on setting the label, see
“Inputting letters (label setting)” (pages
40 - 41).
Note
You cannot set the same label name as the reference Component key or another
existing Component key, regardless of whether characters are upper or lowercase.
If you try to set the same label name, a message appears.
6
When the label setting is complete, press the [OK]
key.
A created Alias Component key is displayed.
7
After confirming that the
created Alias Component
key is displayed, press the
[OK] key.
Creation of the Alias Component key is
complete and the display returns to step
4.
Note
The following keys will not be created as Alias keys when an Alias component is created.
• List key
• Zapping Viewer key
z Tips
• The skin of the reference key is applied to the Alias Component key.
•A created Alias Component key is assigned on the last page of the Home
display. If there is no space to assign a new key on the last page, a new page will
be added, and a new key will be assigned to that page. You can create up to 63
pages for Home display. If you try to create a page over 63 pages, a message will
appear. In this case, press the [OK] key.
8
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.