Filter
Top Products
94
Customizing the Component display (COMPONENT EDIT)
Continued
7
To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
Erasing the data programmed for a function button
The data programmed for a function button (learned signal, macro, Zapping
group) can be erased, and the function button will return to its default setting.
Note
You cannot erase the data of function buttons that have no programmed actions (Empty
buttons), that have preset actions (Preset buttons) or that refer to other keys (Alias
buttons) .
1
Perform steps 1 to 3 in “Deleting a function key (DELETE)” (page
92).
2
Press the Component key that
includes the function button whose
data you want to erase.
3
Press the function button whose data you want to erase.
The confirmation display appears.
4
Press the [YES] key.
The programmed data will be erased, and
the function button will return to its default
setting. The display returns to step 3.
If you press the [NO] key, the display
returns to step 3 without deleting the
programmed data.