Filter
Top Products
29
Executing a Series of
Commands — System
Control Functions
With the System Control function,
you can program a series of
operating commands, and execute
them by pressing just one button.
You can program up to 16
consecutive operation steps to
each of the SYSTEM CONTROL
buttons (1 – 4).
If you have set the System Control
function for a Component Select
button (page 33), the execution of
the programmed commands
begins when you press the
Component Select button for more
than 2 seconds.
When executing the programmed
commands, each remote
commander signal is transmitted.
Example: To watch a video, you
can set a series of operations as
follows:
Power on the TV.
r
Power on the video (VCR).
r
Power on the amplifier.
r
Set the input selector of the
amplifier to VIDEO 1.
r
Set the input mode of the TV
to VIDEO 1.
r
Start video playback.
Continued