Filter
Top Products
31
Using the On-Screen Displays
Selecting RF or IR Remote Control
Reception (SAT-A50 only)
The RF feature allows you to operate the Digital Satellite Receiver from
behind a cabinet or from another room within your home. The RF
Antenna must be connected to use the RF feature (see page 12).
SATELLITE
RECEIVER
ALT AUDIO
JUMP
GUIDE
INDEXFAVORITE
VOL
RM-Y802
VTR3 2 DVD AMP
MENU
EXIT
CH
CATEGORY
CODE SET
1
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
2
Highlight and select “Remote Control”.
TheRemoteControldisplayappears.
MENU
Remote Signal
Letsyouselect IRor RFas thetype
of signal the receiver accepts.
RF Security Control
Lets you change the security code.
RF signals are used to control
many devices. You may need to
change the security code so that
this remote control operates the
Digital Satellite Receiver only.
Return
Closes the Remote Control
display to show the Main Menu.
Help
Opens information about the
Remote Control display.
3
Highlight and select “Remote Signal”.
The Remote Signal pop-up appears.
continued