Filter
Top Products
To manually pair the headset with your phone
1
Make sure your phone has the Bluetooth™ function turned on.
2
Turn on the headset.
3
Headset: Press and hold until the notification light flashes blue.
4
Phone: Scan for Bluetooth™ devices, then select Stereo Bluetooth™ Headset
in the available devices list.
5
Follow the pairing instructions that appear on your phone. If a passcode is
required, enter 0000.
To pair the headset with your phone using NFC
1
Make sure that your phone has the NFC function turned on and that the phone
screen is active.
2
Turn on the headset.
3
Place your phone over the headset so that the NFC detection area of each
device touches the other.
4
Follow the pairing instructions that appear on your phone. If a passcode is
required, enter 0000.
Adjusting the volume
To change the call or music volume
•
During a call, or when listening to music, press the Volume control key
up or down.
Resetting the headset
Reset the headset if it behaves unexpectedly.
To reset the headset
1
Turn off the headset.
2
Charge your device using a USB cable. The notification light illuminates when
charging begins.
3
Press and hold down until the notification light flashes purple.
5
This is an Internet version of this publication. © Print only for private use.