Filter
Top Products
32
Picture quality
When you play a DVD video, picture quality may be
reduced, or the picture may not be displayed.
, The progressive scan option is set to “On” when using a TV that does
not support progressive scan (480p), or when using a cable other than
the component AV cable (for PlayStation®2).
Do not open the disc tray or remove the DVD. With the DVD inserted
in the console, press the I/1 (on/standby)/reset button of the DVD
remote control, or the 1 (standby)/reset button on the console front,
and then hold down the START button of the DVD remote control (for
PlayStation®2) until the DVD picture is displayed. When DVD
playback begins, “Progressive” will be set to “Off” and the picture will
be displayed.
“Progressive” can also be set to “Off” in the Version Information
screen. For details, refer to the PlayStation®2 console instruction
manual.
, Some video images appear unnatural when using progressive scan, even
when the TV supports progressive mode.
Set “Progressive” to “Off”, and view in standard interlace mode.
DVD video operation
Disc playback does not start from the beginning of the
DVD.
, Program Play, Shuffle Play, Repeat Play or A-B Repeat is set.
Refer to pages 13-19 for instructions on how to clear these playback
modes.
Troubleshooting (continued)