Sony SDM-HS95P Home Theater Screen User Manual


 
6 (US)
Displaying this
monitor’s information
While the monitor is receiving a video
signal, press and hold the MENU
button for more than 5 seconds until
the information box appears.
Press the MENU button again to make the
box disappear.
1Model name
2Serial number
3Week and year of manufacture
If any problem persists, call your authorized
Sony dealer and give the following
information:
Model name: SDM-HS75P or SDM-
HS95P
Serial number
Detailed description of the problem
Date of purchase
Name and specifications of your computer
and graphics board
If OUT OF RANGE
appears on the
screen,
x Problems caused by a computer or other
equipment connected, and not caused by the
monitor
Check that the video frequency range is within that specified
for the monitor. If you replaced an old monitor with this
monitor, reconnect the old monitor and adjust the computer’s
graphics board within the following ranges:
Horizontal: 28–80 kHz (analog RGB), 28–64 kHz (digital
RGB)
Vertical: 48–75 Hz (analog RGB), 60 Hz (digital RGB)
Resolution: 1280
× 1024 or less
If you are using
Windows and
replaced an old
monitor with this
monitor,
If you replaced an old monitor with this monitor, reconnect
the old monitor and do the following. Select “SONY” from
the “Manufacturers” list and select “SDM-HS75P” or
“SDM-HS95P” from the “Models” list in the Windows
device selection screen. If the model name of this monitor
does not appear in the “Models” list, try “Plug & Play.”
Symptom Check these items
MENU
INFORMATION
MODEL : SDM-HS75P
SER . NO : 1234567
MANUFACTURED : 2004-52
Example
1
2
3