Filter
Top Products
Additional Operations
56
Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display “L1” in the
display window.
• Press SP/EP to select the tape speed, SP or
EP.
1 Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2 Insert a tape into this (recording) VCR. Search for the point to start
recording and press X PAUSE.
3 Press z REC on this VCR and set it to recording pause.
4 To start editing, press the X PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the x STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, pr ess X PAUSE on this VCR when an
unwanted scene begins. When it ends, pr ess X PAUSE again to r esume r ecording.
Note
• If you star t recording following the pr ocedur e above, the VCR won’ t star t recording
with the APC function. T o record a tape with the APC function, pr ess z REC again
during recor ding pause in step 3 so that the VCR analyzes the tape. Then when you
start recor ding in step 4, pr ess X PAUSE immediately after the APC indicator stops
flashing. If you pr ess X PAUSE before the APC indicator stops flashing, the APC
function is canceled.
X PAUSE
z REC
_/1
x
H
Editing with another VCR (continued)