Filter
Top Products
Getting Started30
SONY SLV-685HF (E) 3-859-040-11 (1)
1 Press MENU, then press CURSOR >/. to
move the cursor (z) to CABLE BOX
CONTROL and press EXECUTE.
When using the EASY SET UP procedure,
skip this step.
2 Press CURSOR ?// to select ON, then
press CURSOR ..
USE
PUSH MENU TO QUIT
/
•CABLE MOUSE ON OFF
CABLE BOX CONTROL
TO SELECT
Setting up cable
box control
(Skip this section if you are
using Hookup 2, 3, 4 or 6.)
Your VCR includes a cable box control
feature that allows the VCR to control
most brands of cable boxes/DSS
receivers via an optional Cable Mouse.
With cable box control, the VCR controls
channels on the cable box/DSS receiver
for timer recording. You can also use the
VCR’s remote commander to change
channels on the cable box/DSS receiver
whenever the cable box/DSS receiver is
turned on even if the VCR is turned off.
To use cable box control, you need to
connect the Sony RM-CM101 Cable
Mouse (not supplied) (pages 10 and 22)
and set the code number and output
channel.
This VCR is programmed with codes necessary to control channel
selection on most brands of cable boxes at the time this VCR was
manufactured. It is possible that new cable boxes may be introduced
that cannot be controlled with the RM-CM101 Cable Mouse. If you have
a cable box that is incompatible with this VCR, contact your cable
operator –– they may be able to provide you with a compatible cable
box.
123
456
789
0
EXECUTE
Number
buttons
• MENU
•
CURSOR
• EXECUTE
•
CURSOR
CABLE BOX CONTROL
REFER TO THE OPERATING
MANUAL FOR THE CODE
•
CABLE MOUSE ON OFF
BOX CODE NO.
BOX OUTPUT CH
–––
CH3
ENTER YOUR CABLE BOX
CODE NO. USING 0–9 KEYS
CURSOR
>/./?//
MENU