Filter
Top Products
Basic Operations28
Recording TV programmes using the easy timer (continued)
3 Press the EASY TIMER knob to confirm the clock setting.
The VCR enters the timer recording setting mode.
To continue the easy timer
setting, go to step 2 in
“Setting the easy timer” on
page 25.
To quit the easy timer setting mode without changing any settings,
press the EASY TIMER knob repeatedly until the
t
indicator
appears in the display window.
To set the timer and clock setting using the remote commander
You can also use the remote commander to set the easy timer and easy clock.
The operations on the VCR and the remote commander correspond as
follows:
To
Confirm the setting and go to
the next setting
Change the time by 15 minutes
(in START/STOP mode)
Change the time by one minute
(in START/STOP mode)
Select the programme
Change the hour/minute by
one hour/minute (in CLOCK
mode)
Do this on the VCR
Press EASY TIMER knob
Turn EASY TIMER knob
or hold PROGRAM +/–
down
Press PROGRAM +/–
Turn EASY TIMER knob
or press PROGRAM +/–
or INPUT SELECT
Turn EASY TIMER knob
or press PROGRAM +/–
Do this on the remote
commander
Press EASY TIMER
Hold PROG +/– down
Press PROG +/–
Press PROG +/– or
INPUT SELECT
Press PROG +/–
SP
APC
START
EASY TIMER