Filter
Top Products
Editing48
Connecting to a VCR or stereo system
How to connect to record on this VCR
This VCR (Recorder)
VMC-810HG audio/video cable (not supplied)
LINE-2 IN
Other VCR (Player)
LINE OUT
TV
: Signal flow
Editing
e.g. SLV-ED88ME/MJ/SG
How to connect to a stereo system (SLV-ED88ME/MJ/
SG only)
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• (SLV-ED66ME/MJ/SG)
Use the following audio/video cable according to the type of the other VCR.
• (SLV-ED88ME/MJ/SG)
If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks,
connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both
right and left channels. When connecting to the AUDIO R (red) jack, the sound is
recorded only on the right channel.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
Jack
LINE-1 IN
LINE-2 IN
If the other VCR is: Use a cable such as:
Stereo type VMC-910HG (3-phono to 2-phono)
Monaural type VMC-710HG/720HG (2-phono to 2-phono)
Stereo type VMC-810HG (3-phono to 3-phono)
Monaural type VMC-910HG (3-phono to 2-phono)