Filter
Top Products
11
SLV-ED818 GB 3-065-581-E1 (1)
123
456
789
0
SP
APC
CLOCK
START
SP
APC
CLOCK
START
Setting or changing the
Easy Clock
When “–:– –” is displayed in the display
window, the VCR clock has not been set.
You need to set the clock using the Easy
Clock function before setting the timer.
You can also change the current time
using the Easy Clock function.
1 • When “–:– –” is displayed in the display window, push EASY
TIMER.
• To change the clock setting, push and hold the EASY TIMER knob
on the VCR for more than three seconds.
The CLOCK indicator and the current clock setting appear in the
display window.
2 Set the current time using the EASY TIMER knob.
1 Turn the EASY TIMER knob clockwise or counterclockwise to
enter the current hour.
2 Push the EASY TIMER knob to confirm the hour setting.
3 Turn the EASY TIMER knob to increase or decrease the minutes
setting by a minute at a time.
EASY TIMER
knob
PROG +/–
Programme
number
buttons
EASY
TIMER
EASY TIMER
EASY TIMER
continued
01GB02CNT-ED818.p65 12/3/01, 11:10 AM11