Filter
Top Products
Additional Operations46
About the R
2
(Reality Regenerator) function
(for SLV-ED915PS/TH, ED818ME/SG, ED817TH and
ED616ME/MJ/SG only)
The R
2
function automatically
adjusts the picture to the most
suitable quality during playback.
When playback starts, the R
2
function activates and the R
2
button lights up.
Each press of the button changes the effect and indication in the display
window as follows:
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the tracking when playing a tape
(the
indicator flashes in the display window, then turns off), distortion
may occur if the tape was recorded in poor condition. If so, manually adjust
the tracking.
Press the TRACKING +/– buttons on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two buttons (the
indicator lights up). To resume automatic
tracking adjustment, eject the tape and reinsert it.
Tracking meter
NORMAL TRACKING
– – – – – – – – – – – – – – – – –
SOFTREAL (status of playback started) DYNA (dynamic)
R
2