Filter
Top Products
54
Additional Operations
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition.
In this case, manually adjust the tracking.
During playback, press TRACKING +/– on
the VCR to display the tracking meter. The
distortion should disappear as you press one
of the two buttons. To resume automatic
tracking adjustments, eject the tape and re-insert it.
SET
MENU:
:
OK:END
SELECT
OSD :
TAPE SELECT
ON
:
OFF:
COLOUR SYSTEM
E180
:AUTO
NICAM
POWER SAVE
ON:ASC
ON:
:
EXIT
TRACKING–––––– ––––––
Tracking meter
Adjusting the picture sharpness (Auto Sharpness Control)
You can automatically adjust the sharpness of the picture.
1 During playback, press MENU, then press M/m /</, to highlight
USER SET and press OK.
2 Press M/m to highlight ASC, then press
,.
3 Press M/m to set ASC to ON or OFF.
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press <.
To sharpen the picture, press ,.
4 Press MENU to return to the original screen.
SET
MENU:
:
OK:
SOFTEN
ASC : OFF
SHARPEN
–– –––––––––– ––– ––––––
PICTURE
END EXIT
ON/OFF :