Filter
Top Products
Getting Started
16
Step 4
Setting up the VCR with the Auto Set
Up function
Before using the VCR for the first time, set up the VCR using the Auto
Set Up function. With this function, you can set the TV channels
guided by the sequence indicated on the TV screen.
Hold down AUTO SET UP on the VCR for more than three seconds.
The VCR automatically turns on.
The VCR starts searching for all of the receivable channels and
presets them according to the TV system you selected in “Tuning
your TV to the VCR.”
When no more receivable channels can be found, presetting stops
and “SET UP” disappears from the display window.
To cancel the Auto Set Up function
Press AUTO SET UP.
Tip
• The factory preset language for the on-screen display is English. If you want to
change the language to Russian, see page 19.
Note
• Do not cancel the Auto Set Up function during presetting. If you do, repeat the step
above.
AUTO SET UP
AUTO
SET UP