Filter
Top Products
18
Tuning your TV to the VCR
Master Page : Left
filename[010GET.fm] model name1[SLV-SE310D] model name2[SLV-SE510D] [3-065-669-E1 (1)]
TochecktoseeiftheTVtuningiscorrect
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 4 above, press PROGRAM +/–
so that another RF channel appears. Then tune the TV to the new RF
channel so that a clear picture appears.
If your TV has a Scart (EURO-AV) connector
4
Tune the TV to the same channel
shownintheVCRdisplaywindow
so that the picture on the right
appears clearly on the TV screen.
Refer to your TV manual for TV
tuning instructions.
If the picture does not appear
clearly, see “To obtain a clear
picture from the VCR” below.
5
Press RF CHANNEL.
YouhavenowtunedyourTVtotheVCR. Wheneveryouwantto
play a tape, set the TV to the video channel.
1
Press ?/1 (on/standby) to turn on the VCR.
SONY VIDEO CASSETTE RECORDER
AUTO SET UP
RF CHANNEL
PROGRAM +/–
RF CHANNEL
?/1