Filter
Top Products
87
Specifications
Additional Information
Master Page : Right
filename[010addi.fm] model name1[SLV-SE610G] model name2[SLV-SE710G]
model name3[SLV-SE710I] model name6[SLV-SE810G]
[3-065-677-11 (1)]
Specifications
System
Channel coverage
PAL (I)
VHF IA to IJ, SA10 to SA13
(SLV-SE710I only)
UHF B21 to B69
CATV S01 to S05, S1 to S20
(SLV-SE710I only)
HYPER S21 to S41 (SLV-SE710I only)
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP:PAL23.39 mm/s (recording/playback)
NTSC33.35 mm/s (playback only)
LP:PAL11.70 mm/s (recording/playback)
NTSC16.67 mm/s (playback only)
EP:NTSC11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Approx. 1 min. (with E180 tape)
Inputs and outputs
i LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
t LINE-2 IN (SLV-SE710G, SE710I)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
t LINE-3 IN (SLV-SE810G)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
t LINE-2 IN L o R (SLV-SE810G)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
R/D L/G (SLV-SE710G, SE710I,
SE810G)
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
20 W
1.2 W (POWER SAVE is set to ON,
minimum)
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions including projecting parts and
controls
Approx. 430 × 98 × 283 mm (w/h/d) (SLV-
SE610G, SE710G, SE710I)
Approx. 430 × 98 × 289 mm (w/h/d)
(SLV-SE810G)
Mass
Approx. 4.1 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to
change without notice.