Sony SLV-SE730N VCR User Manual


 
80
Specifications
Specifications
System
Channel coverage
PAL (B/G, D/K)
VHF E2–E12, R1–R12
UHF E21–E69, R21–R69
CATV S1–S41, S01–S05
RF output signal
UHF channels 21–69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL/MESECAM
23.39 mm/s
(recording/playback)
NTSC 33.35 mm/s
(playback only)
LP: PAL/MESECAM
11.70 mm/s
(recording/playback)
NTSC 16.67 mm/s
(playback only)
EP: NTSC 11.12 mm/s
(playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min. (with E180 tape)
Inputs and outputs
LINE-1 (EURO AV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2 (DEC/EXT)/LINE-3 (DEC/EXT)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
t LINE-2 L o R*
1
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO (OUT/SORTIE) R/D L/G*
2
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
*
1
SLV-SE830N only
*
2
not available on SLV-SE630N and
SE430K
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
• SLV-SE430K
15 W
1.2 W (POWER SAVE is set to ECO2,
minimum)
• SLV-SE630N
17 W
1.2 W (POWER SAVE is set to ECO2,
minimum)
• SLV-SE830N, SE730N and SX730N
17 W
1.3 W (POWER SAVE is set to ECO2,
minimum)
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C