Sony SLV-SE800D1 VCR User Manual


 
89
Specifications
Additional Information
Specifications
System
Channel coverage
PAL (B/G)
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL 23.39 mm/s (recording/playback)
NTSC 33.35 mm/s (playback only)
LP: PAL 11.70 mm/s (recording/playback)
NTSC 16.67 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Approx. 1 min. (with E180 tape)
Inputs and outputs
i LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER/t LINE-2 IN (SLV-SE600E, SX600E,
SE650D, SE700D1/D2/E1/E2, SX700D/E)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
DECODER/t LINE-3 IN (SLV-SE800D1/D2/E,
SX800D)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN (SLV-SE800D1/D2/E, SX800D)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO OUT (SLV-SE650D, SE700D1/D2/E1/E2,
SX700D/E, SE800D1/D2/E, SX800D)
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 240 V AC, 50 Hz
Power consumption
21 W
Operating temperature
5° C to 40°C
Storage temperature
20°C to 60° C
Dimensions including projecting parts and controls
Approx. 430 × 100 × 283 mm (w/h/d) (SLV-SE600A/E,
SX600E, SE650D, SE700D1/D2/E1/E2, SX700D/E)
Approx. 430 × 100 × 290 mm (w/h/d) (SLV-SE800D1/
D2/E, SX800D)
Mass
Approx. 4.3 kg (SLV-SE600A/E, SX600E, SE650D,
SE700D1/D2/E1/E2, SX700D/E)
Approx. 4.4 kg (SLV-SE800D1/D2/E, SX800D)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change without
notice.