Filter
Top Products
43
Recording TV programs using the timer
Basic Operations
Recording TV programs using the timer
You can preset up to eight programs at a
time.
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
•Set TV
/ DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 10).
• When using a cable box, turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select
(PROGRAM) and press ENTER. You can also
display the timer programming menu by
pressing TIMER.
The timer programming menu appears.
SET UP
INPUT
SELECT
V/v/B/b
ENTER
x STOP
CLEAR
TIMER
Z
H PLAY
TV/VIDEO
O RETURN
CH START END DATE
RETURN
SPEED
v
V
b
B
continued