Filter
Top Products
91
Searching using index function
VCR Additional Operations
Searching using index function
To find a specific recording by scanning (Index scan)
The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
1
Insert an indexed tape into the tape compartment.
2
Press INDEX, then press m/M. The
VCR starts scanning each recording for five
seconds in the corresponding direction.
3
Press H to start playback when you find the desired point.
INDEX
H
m/M
x
INDEX
INDEX SCAN BB
:
continued