Filter
Top Products
Getting Started
17
Getting Started
Disabling unwanted programme positions
After presetting the channels, you can disable unused programme positions.
The disabled positions will be skipped later when you press the PROG +/–
buttons.
1 In step 6 above, press ? // repeatedly to display the number “00”
beside CHANNEL SET.
2 Press OK.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1 Press PROG +/– to select the programme position for which you cannot
obtain a clear picture.
2 Press MENU, then select SETTINGS and press OK.
3 Select TUNER and press OK.
4 Select FINE TUNING.
The fine tuning meter appears.
5 Press ? // to get a clearer picture,
then press OK. The menu disappears.
Note that the AFT (Auto Fine Tuning)
setting switches to OFF.
Note
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
Selected programme position
7 If the TV sound is distorted or
noisy, press > /. to move the
cursor ( ) to SYSTEM, then
select B/G or D/K so that you
get the better sound.
8 To allocate another channel to another programme position, repeat
steps 3 to 7.
9 Press OK.
PAUSE
STOP
FFREW
PLAY
OK
PAUSE
STOP
FFREW
PLAY
OK
TUNER PROG 7
SYSTEM [B/G ]
NORMAL/CATV [NORM]
CHANNEL SET [C02 ]
AFT [ON ]
FINE TUNING
SELECT : Vv
SET : Bb
TUNER PROG14
SYSTEM [D/K ]
NORMAL/CATV [CATV]
CHANNEL SET [S01 ]
AFT [OFF ]
FINE TUNING
SELECT : Vv
SET : Bb