Sony SLV-ED915PS VCR User Manual


 
56
Additional Information
Specifications
System
Colour system
PAL, MESECAM, NTSC 3.58, NTSC 4.43
TV system
B/G, D/K, I
Channel coverage
B/G: VHF E2 to E12/UHF E21 to E69/
CATV S01 to S05, S1 to S41
D/K: VHF R1 to R12/UHF R21 to R69
I: VHF SA4 to SA13/UHF B21 to B69/
CATV S01 to S05, S1 to S41
RF output signal
UHF channels 21 to 69 (B/G, D/K, I)
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE-1 IN and LINE-2 IN (SLV-ED915PS/TH,
ED818ME/SG, ED616ME/MJ/SG and ED515PS
only)
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
110 – 240 V AC, 50/60 Hz
Power consumption
16 W SLV-ED915PS/TH
14 W SLV-ED818ME/SG, ED817TH, ED815PS,
ED616ME/MJ/SG and ED515PS
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 × 97 × 292 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.1 kg
Power back-up
Built-in self-charging capacitor
Back-up duration:
up to eight hours at a time (SLV-ED915PS/TH,
ED817TH, ED815PS and ED515PS only)
up to 24 hours at a time (it may differ in actual
performance) (for SLV-ED818ME/SG and
ED616ME/MJ/SG only)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Plug adaptor (1) (included in some models.)
Design and specifications are subject to change
without notice.