Filter
Top Products
43
Basic Operations
Basic Operations
MENU
continued
SET
MENU:
:
OK:END
SELECT
–– –––– –– –– – –––::
35SA2919002 000::
–– –––– –– –– – –––::
–– –––– –– –– – –––::
–– –––– –– –– – –––::
–– –––– –– –– – ––
–
SP
–
–
–
––::
:
EXIT
PR DAY START STOP
CLEAR
OK
PLAY
INPUT
SELECT
OK
PLAY
SET
MENU:
:
OK:END
SELECT
–– –––– –– –– – –––::
PR DAY START STOP
35SA2919002 000::
–– –––– –– –– – –––::
–– –––– –– –– – –––::
–– –––– –– –– – –––::
–– –––– –– –– – ––
–
SP
–
–
–
––::
:
EXIT
3 Press OK.
The date, start and stop times and
tape speed appear on the TV screen.
• When using the G-CODE system
for the first time, “– –” appears in
the “PR” column. Therefore, set
the programme position
manually.
Press M/m to select the desired
programme position.
• To record from other equipment connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PR” position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4 If you want to change the date and
tape speed:
1 Press </,, to select the item
you want to change.
2 Press M/m to reset it.
To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 44.
5 Press MENU to exit the menu.
6 Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.