Filter
Top Products
51
Recording TV programs using the Dial Timer (SLV-N60/AX20 only)
Basic Operations
Notes
• If eight programs have already been set using the VIDEO Plus+ system (SLV-N60/AX20
only) or the TIMER SET/CHECK menu, “FULL” appears in the display window for about
five seconds.
• If you set the clock using the Auto Clock Set function, the clock will adjust itself to the
incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have
set ACS correctly.
• You cannot set the clock to February 29
th
using the Dial Timer. Please use the Auto Clock Set
function to set the VCR to this day.
• The
indicator flashes in the display window when you complete the setting in step 9 with
no tape inserted.
• The VCR will be unlocked when:
– You stop timer recording by pressing x STOP.
– You insert a tape.
– The AC power cord is disconnected or power supply stops.
About the Demonstration Mode
The Dial Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than eight examples of timer settings when demonstrating
the use of the Dial Timer. It cancels the FULL notice which appears if eight
programs have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X PAUSE on the VCR
while turning the DIAL TIMER. “DEMO” appears in
the display window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the AC power cord. Although the Demonstration
Mode is canceled, the timer settings entered while using the Demonstration Mode
will remain. Be sure to manually cancel the timer settings before you use the Dial
Timer or any other timer method after reconnecting the AC power cord (see page 61).