Filter
Top Products
82
Connecting to a VCR or stereo system
Example C
How to connect to a stereo system
(SLV-SE500K/R and SE800N/K only)
Connect the LINE-2 IN AUDIO L/R jacks on this VCR to the audio output jacks on
the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connecter, use the VMC-2106HG cable
instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the DECODER/LINE-3 IN*
2
(or DECODER/LINE-2
IN*
3
) connector, set DECODER/LINE3*
2
(or DECODER/LINE2*
3
) to LINE3*
2
(or
LINE2*
3
) in the OPTIONS-2 menu.
*
1
SLV-SE500K/R and SE800N/K only (AUDIO R (right) jack is not available on SLV-
SE500K/R.)
*
2
SLV-SE500K and SE800N/K only
*
3
SLV-SE700N/K only
TV
DECODER/
t
LINE-3 IN
*
2
or
DECODER/
t
LINE-2 IN
*
3
VMC-2121HG Scart cable (not supplied)
Scart
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)