Filter
Top Products
77
Editing
5 Press AUDIO DUB.
The programme position changes to “L2,” and the indicator appears
in the display window.
6 To start editing, press the P PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops
automatically.
To stop while editing
Press p STOP on this VCR and the stereo system (or other VCR).
Note
• After you use this feature, the audio in playback mode is automatically set to
monaural.
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the OPTIONS-1 menu (page 72). Use this feature
to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not funtion.
Remember to reset AUDIO MIX to OFF after playing the tape.