Filter
Top Products
Getting Started
9
Connecting the VCR
filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Step 3 : Connecting the VCR
We recommend connecting your VCR to your TV using a Scart (EURO-
AV) cable. You must still connect your VCR to your TV with an aerial
cable as well.
If you use the Scart (EURO-AV) cable for connecting, you will improve
the picture and sound quality playback of your VCR and make the set up
easier.
• Connection to your TV with an aerial cable only, see page 12.
• Connection to your TV and Set-Top Box, see page 13.
Connection to your TV with a Scart (EURO-AV) connector
1
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
2
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
Mains lead
i
LINE-1
(TV)
AERIAL IN
Scart
(EURO-AV)
to mains
Aerial cable (supplied)
AERIAL OUT
: Signal flow
Scart (EURO-AV) cable
(not supplied)
AERIAL IN
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
continued