Filter
Top Products
46
To cancel the “DIGITAL VIDEO
ENHANCER” setting
Select “OFF” in Step 2.
To turn off the Control Bar
Press DISPLAY repeatedly until the Control
Bar is turned off.
Note
Depending on the disc or the scene being played,
noise found in the disc may become more apparent.
If this happens, it is recommended that you use the
BNR function (page 43) with the DVE function. If
the condition still does not improve, reduce the
Digital Video Enhancer level, or select “SOFT”
(DVD only) in Step 2 above.
Changing the Angles
If various angles (multi-angles) for a scene
are recorded on the DVD, “ ” appears in the
front panel display. This means that you can
change the viewing angle.
1 Press ANGLE during playback.
The number of the angle appears on the
display.
The number in parentheses indicates the
total number of angles.
2 Press ANGLE repeatedly to select
the angle number.
The scene changes to the selected angle.
z Hint
You can also select “ANGLE” from the Control Bar
(page 12).
Note
Depending on the DVD, you may not be able to
change the angles even if multi-angles are recorded
on the DVD.
ANGLE
2
(
7
)