Filter
Top Products
Settings and Adjustments
77
xCD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs.
This setting will be activated when you open/
close the disc tray.
This function affects the output of the
following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks
Note
If you select “ON” when playing CD type DTS discs,
the sound will become noisy.
Settings for the Sound
(AUDIO SETUP)
“AUDIO SETUP” allows you to set the
sound according to the playback and
connection conditions.
Select “AUDIO SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 72).
The default settings are underlined.
xAUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
This function affects the output of the
following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks
x
AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the “AUDIO DRC” function. This affects the
output from the following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks
OFF
Select this when playing CD discs,
including CD type DTS discs.
ON
Eliminates the use of unnecessary
circuits needed to play CDs.
OFF Turns off the audio attenuation.
Normally, select this position.
ON Reduces the audio output level so that
no sound distortion occurs.
Select this when the playback sound
from the speakers is distorted.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
DOLBY DIGITAL:
D-PCM
DTS:
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
continued