Filter
Top Products
Basic Operations
31
Basic Operations
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\030BAS.fm
masterpage:3 columns Right
TV Controls
MENU
TV/VIDEO
CHANNELVOLUM
E
POWER
TIMER
LAMP
POWER
OPEN
POWER
TIMER
LAMP
POWER
4
0
2
9
6
78315
Be careful not to pinch your fingers
when opening the cover.
To open the cover
Item Description
1
MENU Press to display MENU with TV functions and settings (see “Overview of MENU” on page 32).
2
TV/VIDEO
Press to cycle through the video inputs. If you set a certain input to Skip in Label Video
Inputs, then the input will not appear. For details, see page 45.
In the MENU screen, this button serves as confirming the selection or setting.
3
VOLUME +/–
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
4
CHANNEL +/–
Press to scan through channels. To scan quickly through channels, press and hold down either
–/+. In the MENU screen, these buttons serve as up/down buttons.
5
TIMER LED When the timer is set, this LED will remain lit even if the TV is turned off. For details, see
page 46.
6
LAMP LED Blinks in red when the lamp for the light source has burned out. For details, see “Replacing the
Lamp” on page 51.
7
POWER LED Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 53).
8
(IR) Infrared
Receiver
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
9
POWER Press to turn on and off the TV.
q;
Speaker Outputs the audio signal.
✍ The CHANNEL + button has a tactile dot. Use it as a reference when operating
the TV.