Sony KDS-60A2000 Projection Television User Manual


 
Getting Started
21
Getting Started
KDS-50A2000/KDS-55A2000/KDS-60A2000
2-686-615-13(1)
F:\Worker\SONY SXRD-A EN 13(1)\2686615131\020GET.fm
masterpage:3 columns Right
Setting Up the Channel List - Initial Setup
After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen
appears when you turn on the TV for the first time after hooking it up.
1 Press to turn on the TV.
The Initial Setup screen appears.
2 Press V/v to highlight the on-screen
display language. Then press . The
message “Start auto program now?”
appears.
3 Press V/v to highlight “Yes” then press .
Auto Program performed through Initial Setup will automatically create a
list of receivable channels from both VHF/UHF antenna and cable TV
channels if both sources are connected.
If you choose to set up the channels at a later time, select the Auto Program
option in the Channel settings to scan available channels (see page 41).
If you select "No" during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.
TV POWER