Filter
Top Products
49
Setup
Setting Up the Channel List
After you finish connecting your TV, you need to run Auto Setup to set up
your channels. The Auto Setup screen appears when you turn on your TV for
the first time after hooking it up. If you do not want to set up the channels at
this time, you can do it later by selecting the Auto Program option in the
Channel Menu (see page 84).
The Auto Setup feature does not apply for installations that use
a cable box for all channel selection.
Using Auto Setup 1 Press POWER to turn on the TV.
2 Press FUNCTION on the remote control repeatedly until the TV indicator
lights up.
3 To continue running Auto Setup, press CH+. To exit Auto Setup, press
CH–.
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To reset the TV to factory settings
1 Press POWER to turn on the TV.
2 Hold down RESET on the remote control.
3 Press POWER on the Media receiver unit. (The TV will turn itself off,
then back on.)
4 Release RESET.