Filter
Top Products
39
Setup
Notes on Using This Connection
Do not leave the Electric Program Guide and display indication
turned on.
To Do This ... Do This ...
Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control to
operate the satellite receiver or
VCR
If you have a non-Sony VCR or satellite receiver, you must program the remote
control. See “Programming the Remote Control” on page 52.
Activate the TV remote control to
operate the satellite receiver or
VCR
For the satellite receiver, press SAT/CABLE FUNCTION.
For the VCR, press VCR/DVD FUNCTION.
Control satellite receiver and
VCR functions with the TV
remote control
See “Operating a Satellite Receiver” on page 54 and “Operating a VCR” on page 54.
Label video inputs to easily
identify equipment connected to
the TV
See the instructions for setting up Video Labels on page 96.