Filter
Top Products
Installing and Connecting the Projection TV
29
Installing and Connecting the Projection TV
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
[4-088-847-12]
Connecting a Camcorder
For easy connection of the camcorder, the projection TV has front Audio and
Video inputs (shown below). However, if you prefer, you can also connect
the camcorder to the projection TV’s rear Audio and Video IN jacks.
Using AUDIO and S VIDEO cables, connect the camcorder’s Audio and S
VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.
✍ If you have a mono camcorder, connect its left audio output to the
projection TV’s AUDIO L (MONO) jack.
✍ If your camcorder is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VIDEO (yellow)
A/V output
AUDIO-L (white)
AUDIO-R (red)
S VIDEO
YC-15V/30V (not supplied)
VMC-810S/820S
(not supplied)
KP-51WS500,
KP-57WS500, and KP-65WS500
S VIDEO
YC-15V/30V (not supplied)
VMC-810S/820S
(not supplied)
VIDEO
(yellow)
A/V output
AUDIO-L (white)
AUDIO-R (red)
KP-46WT500
01COV.book Page 29 Tuesday, July 30, 2002 3:46 PM