Sony KP 61V90 Projection Television User Manual


 
26
Adjusting Your SET UP (menus) (continued)
Sony KP-43T90/48V90/53S76/53V90/61V90 (US) 4-082-881-13 (1)
Mode
Customized
picture viewing
Picture
Adjustment
Picture adjustment
Color Temp
White intensity
adjustment
Noise Reduction
Noise reduction
You can choose one of five different video modes that best suits the program you
are watching. You can also perform the Picture Adjustment (such as
Brightness, Color, etc.) for Movie, Personal 1 or Personal 2 to suit your
taste.
Vivid: Select for enhanced picture contrast and sharpness.
Standard: Select to display a standard picture for normal viewing
environments.
Movie: Select to display a finely detailed picture for low light environments.
Personal 1, Personal 2: Select to customize the Picture Adjustment of the
Video menu according to your personal preference.
Press PICTURE MODE on the remote control for direct selection of a Mode
setting.
First select Movie, Personal 1 or Personal 2 from Mode, then highlight the
desired option using the V or v button and press
to display the adjusting
slider of the selected option.
Picture: Adjust slider right (up) to increase picture
contrast; left (down) to decrease it.
Brightness: Adjust slider right (up) to brighten the
picture; left (down) to darken it.
Color: Adjust slider right (up) to increase color
intensity; left (down) to decrease it.
Hue: Adjust slider right (up) to increase the green
tones; left (down) to increase the red tones.
Sharpness: Adjust slider right (up) to sharpen the
picture; left (down) to soften it.
Cool: Select to give the white colors a blueish tint.
Neutral: Select to give the white colors a neutral tint.
Warm: Select to give the white colors a reddish tint.
Select On to reduce picture noise.
Select Off to cancel the feature.
Noise Reduction selection can be set independently for each Picture Mode ,
except for "Vivid" and "Standard" which are both predetermined fixed settings.
To restore the factory settings
Press RESET on the remote control while the
Video menu is selected. To restore each
“Mode” to the factory setting, press RESET
after selecting the mode to be reset.
Note:
“Picture Adjustment,“ “Color Temp“ and
“Noise Reduction“ can only be changed in
“Movie,“ “Personal 1“ and “Personal 2“.
Using the Video Menu
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 25.
To select the Video menu:
Display , Highlight , Select
Personal 1
Picture
Hue
Color
Brightness
Sharpness
Move Select
End
MENU
MENU
Video
Mode: Vivid
Picture Adjustment
Color Temp: Cool
Noise Reduction :Off
Move Select
End
MENU
ch
01GB08ADJ-E.P65
3/9/02, 3:40 PM
26