Filter
Top Products
11
2
Insert the locking rod.
The locking rod can be inserted from either side. The illustration below
shows an example of how to insert the locking rod from the right side.
1 Insert the longer side of the locking rod into the holes on bracket
E.
2 Insert the curved side of the locking rod into the hole on bracket
A. Hold and press the locking rod at part to pass its end
through the hole.
3 Turn the locking rod until it stops to secure it in place.
Note
To prevent the locking rod from falling out of the brackets, the
space between both ends of the locking rod is greater than that
between the holes on the brackets. Hold and press the locking
rod at part
so that it can pass through the holes.
Caution
If the TV is lifted up when the locking rod is not installed properly, the TV may fall
off the Wall-Mount Bracket and cause serious injury.
Be sure to insert and secure the locking rod in place.
Locking
rod
1
3
2
continued