Filter
Top Products
Advanced
41
•
Using Network services
IP address/DNS settings
Select “IP/DNS setting mode” and set to
“Automatic”
(When IP/DNS automatic acquisition in DHCP can be
used)
IP address/DNS settings
IP setting mode
IP address 192.168.0.5
Subnet mask 255.255.255.0
Default gateway 192.168.0.254
DNS setting mode Automatic
DNS 192.168.0.20
Automatic
Menu
Picture
Audio
Timer
Network
The acquired address is displayed.
select
OK
Each IP address is acquired automatically
If you are using a broadband router, IP automatic
acquisition in DHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
■Manual setting
Select “IP/DNS setting mode” and set to “Manual”
Select the item and press OK
Check the specifications of the broadband router and
enter each IP address.
Or Enter each IP address as was specified by the
provider
IP address
OK
10
I
0 . 0 . 0 . 0
Proxy setting
Set only if specified by the provider. It is not required for normal household use.
Select “Proxy setting”
Menu
Picture
Audio
Timer
k
IP address/DNS settings
IP setting mode
IP address 192.168.0.5
Subnet mask 255.255.255.0
Default gateway 192.168.0.254
DNS setting mode Automatic
DNS 192.168.0.20
Proxy setting
Automatic
Network
select
OK
Select item and press OK
select
OK
Menu
Picture
Audio
Proxy setting
Proxy address
0
Proxy port
Enter address or port number and press OK
■Proxy address
This is the address of the relay server that is connected
to the target server instead of the browser and sends
data to the browser. Setting is only required if specified
by the provider.
■Proxy port
This number is specified by the provider together with the
Proxy address.
Network link
■Edit the name of this TV
Sets your favorite name for this TV. This name
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
Select “VIERA network name”
Menu
Picture
Audio
Network
Network link
VIERA network name
DLNA remote control Enable
VIERA
DLNA remote volume control
Network remote control Enable
Enable
select
OK
Edit the name and press OK
■Switches DLNA remote control (Disable/Enable)
Switches DLNA remote control “Disable” or “Enable”
select
DLNA remote control Enable
■Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
• Available only when “Enable” is selected in “DLNA remote
control”
select
DLNA remote volume control
Enable
■Switches Network remote control (Disable/Enable)
Switches remote control of network device like smartphone
“Disable” or “Enable”.
select
Network remote control Enable
TC-L32_37_42_47E5_EN.indb 41TC-L32_37_42_47E5_EN.indb 41 4/23/2012 11:28:00 AM4/23/2012 11:28:00 AM