Filter
Top Products
L
“Setup” setting
Press WEGA GATE and select “Settings”.
Press V or v to select the “Setup” icon (
),
then press .
“Language” Change the menu language.
Press V or v to select either “English” or “ ” (Russian),
then press .
“Picture Rotation” Adjust the picture position when it is not aligned with the TV
(KV-AW21M91A only) screen.
Press B or b to adjust the picture position, then press .
“Video Label” Label the connected equipment.
(1) Select “Video Input” and press . Press V or v to select the
input you want to label, then press .
(2) Select “Label” and press , then press V or v to select
the label options: “Video 1”/“Video 2”, “VCR”, “SAT”,
“Game” or “Edit”*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press .
“Color System” Select the color system.
Press V or v to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press . Normally, set this to
“Auto”.
“Wake Up Timer
Allow your TV to emit beeping sound when TV switches on
Beep
” automatically using wake up timer.
(KV-AW21M91A only)
Press V or v to select “On”, then press .
To cancel, select “Off”, then press .
“Factory Settings”
Reset your TV to factory settings.
Press and press V or v to select “Yes”. Then press .
Your TV will go blank for a few seconds, then the “Initial Setup”
menu will appear.
To cancel, select “No”, then press .
•To ensure the beeping sound can be heard, you must set an appropriate volume
level on your TV and make sure the TV is not in mute condition.
•To stop the beeping sound, press any buttons on the remote control or front
panel.
• If no button is pressed for three minutes, the beeping sound will automatically
go off.
Confirm
End
Setup
Select
Language:
Picture Rotation
Video Label
Color System:
Wake Up Timer Beep:
Auto
Factory Settings
On
English